Cruise Set: After setting up the preset positions, you can configure a Cruise function for the PTZ
camera to turn to multiple preset positions automatically.
To set up the Cruise:
1. Check the Effective boxes to select the desired Preset Positions, and then set up the stay time (in
second) for each Preset Position. You can drag the slide bar on the right to display other
positions.
2. Click the S-Path button to save the settings.
3. Click the Start-CR button to start the Cruise function. Click again to stop the Cruise function.
4. To delete the setup Cruise configurations, click the C-Path button.
5. To Exit the Cruise Set window, click the Exit button.
39
TUTIS Series DVR