Power On And Login; Firmware Upgrade - EverFocus TUTIS-16F3 User Manual

TUTIS Series DVR

3.3 Power On and Login

After the above installation, you can power on the DVR. Simply plug one end of the Power
Cord to the Power-In port on the rear panel of the DVR, and the other end to the power
outlet. The PWR (power) LED will light on and the DVR will beep once to indicate the power is
on. Wait until the DVR to make a long beep, and the DVR is ready for operation. For the 16CH
model, you can use the Power Switch on the rear panel to turn on / off the power after
connecting the DVR to the power outlet.
When the DVR is powered-on, the system enters the preview status. If there is video input,
the corresponding channel will display the monitoring videos on the main interface. Full
screen and multi-screen switch can be realized by double clicking and right clicking on the
main interface. If the user authentication has been enabled on the DVR, the login window
would pop up. The login username is admin (lower case), while the password is 00000000.
Input Method
Click the 123 / ABC / abc / *#! on the right side of the on-screen keyboard to switch between
the input characters. Click to hide the on-screen keyboard or to delete a character.

3.4 Firmware Upgrade

You can simply upgrade the latest firmware using the USB storage device. To start upgrading
firmware, ensure to insert the USB storage device to the DVR before powering on the DVR.
1. Power off the DVR.
2. Insert the USB storage device stored with the firmware files to the DVR.
3. Power on the DVR. The DVR will automatically detect and then upgrade the firmware files.
Once the process is complete, the Live View window appears.
13