Configure The Autoprovisioning Parameters - CyberData 011113 series Operation Manual

2.3.12 Configure the Autoprovisioning Parameters

1. Click the Autoprovisioning button to open the Autoprovisioning Configuration page.
See
2. On the Autoprovisioning Configuration page, you may enter values for the parameters
indicated in
Web Page Item
Autoprovisioning
Enable Autoprovisioning
Get Autoprovisioning from DHCP
Autoprovisioning Server (IP Address) See
Autoprovisioning Autoupdate
(in minutes)
Operations Guide
Figure 2-27.
Figure 2-27. Autoprovisioning Configuration Page
Table 2-19.
Table 2-19. Autoprovisioning Configuration Parameters
930323L
Installing the VoIP Indoor Intercom with Keypad
Description
See Section 2.3.12.1, "Autoprovisioning".
See Section 2.3.12.1, "Autoprovisioning".
Section 2.3.12.1, "Autoprovisioning"
Type the desired time (in minutes) that you want the
Autoprovisioning feature to update (6 character limit).
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Parts List
(15 character limit).
CyberData Corporation
57