CyberData 011113 series Operation Manual page 55

Operations Guide
Table 2-17. Audio Configuration Parameters (continued)
Web Page Item
Rebooting
Restoring default
Ringback Tone
Ring Tone
Intrusion Sensor Triggered
Door Ajar
Night Ring
Installing the VoIP Indoor Intercom with Keypad
Description
Corresponds to the spoken word "Rebooting"
(24 character limit).
Corresponds to the message "Restoring default"
(24 character limit).
This is the ringback tone that plays when calling a remote
extension (24 character limit).
This is the tone that plays when set to ring when receiving
a call (24 character limit).
Corresponds to the message "Intrusion sensor triggered."
Corresponds to the message "Door Ajar"
(24 character limit).
Specifies the ringtone for nightring. By default this
parameter uses the same audio file that is selected for the
Ring Tone parameter.
The Browse button will allow you to navigate to and select
an audio file.
The Play button will play that audio file.
The Delete button will delete any user uploaded audio and
restore the stock audio file.
The Save button will download a new user audio file to the
board once you've selected the file by using the Browse
button. The Save button will delete any pre-existing user-
uploaded audio files.
930323L
Parts List
CyberData Corporation
49