Hdd Led Connector (Jfp1 Pins 2 & 5); Reset Connector (Jfp1 Pins 9 & 12); Snmp Connector (Jfp1 Pins 8 & 11); Case Open (Jcase1) - Advantech ASMB-823I User Manual

2.8.3 HDD LED Connector (JFP1 Pins 2 & 5)
You can connect an LED to connector JFP1 to indicate when the HDD is active.
2.8.4 Reset Connector (JFP1 Pins 9 & 12)
Many computer cases offer the convenience of a reset button.
2.8.5 SNMP Connector (JFP1 Pins 8 & 11)
SNMP connector could connect with "SAB-2000" remote control board to monitor
ASMB-823I through the super IO chip.
2.8.6

Case Open (JCASE1)

A Chassis Intrusion header is located at JCASE1 on the motherboard. Attach the
appropriate cable from the chassis to be informed of a chassis intrusion when the
chassis is opened. The default function is disabled and Pin 1-2 is bridged by a jumper
cap.
JCASE1
+
2 5
9 12
8 11
(Data) (CLK)
21
1
2
ASMB-823I User Manual