Table of Contents
Advertisement
2.8.3
HDD LED Connector (JFP1 Pins 2 & 5)
You can connect an LED to connector JFP1 to indicate when the HDD is active.
2.8.4
Reset Connector (JFP1 Pins 9 & 12)
Many computer cases offer the convenience of a reset button.
2.8.5
SNMP Connector(JFP1 Pins 8 & 11)
SNMP connector could apply with "SAB-2000"remote control board to monitor the sit-
uation of ASMB-922I through super IO chip.
2.8.6
Case Open (JCASE1)
A Chassis Intrusion header is located at JCASE1 on the motherboard. Attach the
appropriate cable from the chassis to be informed of a chassis intrusion when the
chassis is opened.
The defaults function is disabled and Pin 1-2 was short by jumper cap.
1
4
7
10
+
-
+
2
5
9 12
8 11
(Data) (CLK)
21
ASMB-922I User Manual
Advertisement
Table of Contents
