Advantech ASMB-813I User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Server Board
  5. ASMB-813I Series
  6. User manual
Advantech ASMB-813I User Manual

Advantech ASMB-813I User Manual

Lga 2011-r3 intel xeon e5-2600v3 atx server board
Hide thumbs Also See for ASMB-813I:
Table of Contents

Advertisement

Quick Links

User Manual
ASMB-813I
®
LGA 2011-R3 Intel Xeon
E5-2600v3 ATX Server Board

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ASMB-813I and is the answer not in the manual?

Questions and answers

Related Manuals for Advantech ASMB-813I

Summary of Contents for Advantech ASMB-813I

  • Page 1 User Manual ASMB-813I ® LGA 2011-R3 Intel Xeon E5-2600v3 ATX Server Board...
  • Page 2 No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
  • Page 3 Whether your new Advantech equipment is destined for the labo- ratory or the factory floor, you can be assured that your product will provide the reliability and ease of operation for which the name Advantech has come to be known.

  • Page 4: Declaration Of Conformity

    Caution! There is a danger of a new battery exploding if it is incorrectly installed. Do not attempt to recharge, force open, or heat the battery. Replace the battery only with the same or equivalent type recommended by the man- ufacturer. Discard used batteries according to the manufacturer's instructions. ASMB-813I User Manual...
  • Page 5 It should be free of marks and scratches and in perfect working order upon receipt. When unpacking the ASMB-813I, check it for signs of shipping damage. (For example, damaged box, scratches, dents, etc.) If it is dam- aged or it fails to meet the specifications, notify our service department or local sales representative immediately.
  • Page 6 8* SATA3 5 PCIe x8 (or two x16 and one x8) one PCIe x4 and one PCIe x1 ASMB-813-00A1E 8* SATA 3 5 PCIe x8 (or two x16 and one x8) one PCIe x4 and one PCIe x1 ASMB-813I User Manual...

  • Page 7: Table Of Contents

    Clear CMOS Connector (JCMOS1, JME1) ..........25 2.17 PMBUS Connector (PMBUS1)..............26 2.18 Front Panel SMBUS Connector (SMBUS1) ..........27 2.19 IPMI Module Connector (BMC1)*............27 2.20 VOLT1 Connector ................... 28 2.21 GPIO Connector (GPIO1) ............... 28 Chapter AMI BIOS ..........31 ASMB-813I User Manual...
  • Page 8 External Keyboard Connector (KBMS2) ..........84 Table B.5: External Keyboard Connector (KBMS2)....84 System & CPU Fan Power Connector (SYSFAN0~2, CPUFAN0) ..84 Table B.6: Fan Power Connector (SYSFAN0~2, CPUFAN0)..84 Power LED (JFP3) .................. 84 ASMB-813I User Manual viii...
  • Page 9 8-pin Alarm Board Connector (VOLT1)........... 88 Table B.15:8-pin Alarm Board Connector (VOLT1) ....88 B.16 Case Open Connector (JFP1)..............88 Table B.16:Case Open Connector (JFP1) ........88 B.17 Front Panel LAN LED Connector (LANLED1)......... 89 Table B.17:LAN LED Connector (LANLED1)......89 ASMB-813I User Manual...
  • Page 10 ASMB-813I User Manual...

  • Page 11: Chapter 1 Overview

    Chapter Overview...

  • Page 12: Introduction

    High reliability and outstanding performance makes ASMB-813I the ideal plat- form for industrial server/networking applications. By using the Intel C612 chipset, the ASMB-813I offers a variety of features such as 8 onboard SATA III interfaces; it supports IRST (Intel Rapid Storage Technology) and provides RAID 0, 1, 10 and 5 (Windows only*);...

  • Page 13: Specifications

    1 x 24-pin SSI EPS 12 V power connector (Input 12 V, 5 V, 3.3 V, 5 V standby) CPU Power 2 x 8 pin SSI EPS 12 V power connector for CPU & Memory power (12V) ASMB-813I User Manual...
  • Page 14 RoHS RoHS Compliant 6/6 Pb Free  Environmental Spec. Operating Temperature: 0 to 60°C  Non-operating Temperature: -40 to 85°C  Operating Relative Humidity: 10% to 95% (non-condensing)  Non-operating Relative Humidity: 10% to 95% (non-condens- ing) ASMB-813I User Manual...

  • Page 15: Board Layout, Jumpers And Connectors

    Board Layout, Jumpers and Connectors Connectors on the ASMB-813I are linked to external devices such as hard disk drives. In addition, ASMB-813I has a number of jumpers that are used to configure the system for specific applications. The tables below list the functions of each jumper and connector. Later sections in this chapter give instructions for setting jumpers.

  • Page 16: Table 1.2: Onboard Lan Led Color Definition

    CPU0 fan connector (4-pin) DIMMA1/A2 Channel A DIMM1/Channel A DIMM2 DIMMB1/B2 Channel B DIMM1/Channel B DIMM2 DIMMC1/C2 Channel C DIMM1/Channel C DIMM2 DIMMD1/D2 Channel D DIMM1/Channel D DIMM2 EX_THR1 Connector for external thermistor GPIO1 GPIO function for customize usage ASMB-813I User Manual...

  • Page 17: Table 1.5: Onboard Led

    SLOT5 PCIE x16 slot SLOT6 PCIE x16 slot SLOT7 PCIE x8 slot of PCH SMBUS1 SMBus header (For Advantech chassis usage) SPI_CN1 Connector for BIOS update tool SYS FAN0 System fan connector (4-pin) SYS FAN1 System fan connector (4-pin) SYS FAN2...

  • Page 18: Block Diagram

    Block Diagram Figure 1.3 Block Diagram System Memory ASMB-813I has eight 288-pin memory slots for DDR4 1600/1866/2133 MHz memory modules with maximum capacity of 256 GB (Maximum 32 GB for each DIMM). ASMB-813I supports registered DIMMs memory module. Memory Installation Procedures...
  • Page 19 To install DIMMs, first make sure the two handles of the DIMM socket are in the "open" position. i.e. The handles lean outward. Slowly slide the DIMM module along the plastic guides on both ends of the socket, ASMB-813I User Manual...
  • Page 20 Press the DIMM module right down into the socket, until you hear a click. This is when the two handles have automatically locked the memory module into the correct position of the DIMM socket. Finished. ASMB-813I User Manual...

  • Page 21: Processor Installation

    Processor Installation The ASMB-813I is designed for Intel E5-2600 v3 series Xeon processor. Press the first lever and move it sideways slightly until it is released from the retention tab. Press the other lever and move it sideways slightly until it is also released from the retention tab.
  • Page 22 Position the CPU over the socket ensuring that the triangle mark on the CPU lines up with the triangle mark on the motherboard. Triangle mark Remove protective plastic cover. Close the load plate over the CPU. ASMB-813I User Manual...
  • Page 23 Push down both levers and insert them under the retention tabs ensuring the edge of the load plate is fixed securely by both levers. Finished. ASMB-813I User Manual...
  • Page 24 ASMB-813I User Manual...

  • Page 25: Chapter 2 Connections

    Chapter Connections...

  • Page 26: Introduction

    Mbps (USB 2.0) / 5Gbps (USB 3.0) and fuse protection are supported. The USB interface can be disabled in the system BIOS setup. The ASMB-813I is equipped with two high-performance 1000 Mbps Ethernet LANs. They are supported by all major network operating systems. The RJ-45 jacks on the rear plate provide convenient 1000Base-T operation.

  • Page 27: Vga Connector (Vga1)

    VGA Connector (VGA1) The ASMB-813I includes a VGA interface that can drive conventional CRT and LCD displays. VGA1_COM1 Serial Ports (COM2) The ASMB-813I offers one 2 x 5P pitch: 2.50mm serial port. (Onboard) COM2 ASMB-813I User Manual...

  • Page 28: Ps2 Keyboard And Mouse Connectors (Kbms2)

    CPU Fan Connector (CPU FAN0) If a fan is used, this connector supports cooling fans that draw up to 1.5A (18W). CPUFAN0 Table 2.1: CPU FAN0 Pin Definition CPU FAN0 CPU FAN1 +12V +12V CPU0_TACH CPU1_TACH CPU0_PWM CPU1_PWM ASMB-813I User Manual...

  • Page 29: System Fan Connector (Sys Fan0/Fan1/Fan2)

    SYS FAN2 +12V +12V +12V FAN0_TACH FAN1_TACH FAN2_TACH FAN0_PWM FAN1_PWM FAN2_PWM Front Panel Connector (JFP1) There are several external switches and LEDs to monitor and control the ASMB-813I. JFP1 JFP1 PWRSW RESET SNMP & & 2(+) 5(-) 8 HDDLED HDDLED...

  • Page 30: Power Led (Jfp3)

    System Off (S5) 2.8.2 External Speaker (JFP1 pins 10, 12, 14, 16) JFP2 pins 1, 4, 7, 10 connect to an external speaker. The ASMB-813I provides an onboard buzzer as an alternative. To enable the buzzer, set pins 7-10 closed. 2.8.3 HDD LED Connector (JFP1 Pins 2 &...

  • Page 31: Case Open (Jcase1)

    2.8.6 Case Open (JCASE1) SNMP connector could connect with “SAB-2000” remote control board to monitor ASMB-813I through the super IO chip. JCASE1 SATA SGPIO (SGPIO1 & 2) SGPIO1 SGPIO2 SCLOCK_PCH SLOAD_PCH SDATAOUT0_PCH SDATAOUT1_PCH ASMB-813I User Manual...

  • Page 32: Front Panel Lan Indicator Connector (Lanled1)

    VCC3_LAN2LED LAN1_LED1_1000M LAN2_LED2_1000 LAN1_LED2_100M LAN2_LED0_100 VCC3 2.11 Serial ATA Interface (SATA0-SATA3, sSATA0- sSATA3) ASMB-813I features eight serial ATA III interfaces (up to 600 MB/s) which eases cabling to hard drives with thin and long cables. sSATA0~3 SATA0~3 ASMB-813I User Manual...

  • Page 33: Pcie & Pci Expansion Slots

    2.12 PCIe & PCI Expansion Slots The ASMB-813I provides several expansion slots. PCIEx1_SLOT1 PCIEx8_SLOT2 PCIEx4_SLOT7 PCIEx8_SLOT3 PCIEx16_SLOT4 PCIEx16_SLOT6 PCIEx8_SLOT5 Slot Length Link PCI-E Generation PCIe link provide from SLOT1 PCI-E x1 PCI-E x1 SLOT2 PCI-E x16 PCI-E x8 SLOT3 PCI-E x16...

  • Page 34: Auxiliary Power Connector (Atxpwr1/ Atx12V1/Atx12V2)

    Please use a power supply which is of SSI type; minimum output should be at least 500 W. ATXPWR1 & ATX12V1 sockets should be all connected with power supply, otherwise ASMB-813I will not boot up normally. 2.14 HD Audio Interface Connector (HDAUD1)

  • Page 35: Lpc Connector (Lpc1) For Optional Tpm Module

    LPC_AD0 LPC_FRAME +3.3 V LPC_AD3 LPC_AD2 SMB_SCL_LPC SERIRQ_PCH SMB_SDA_LPC +5V_AUX 2.16 Clear CMOS Connector (JCMOS1, JME1) Setting jumper from pin 1_2 to pin 2_3,then back to pin 1_2 to reset CMOS data. JCMOS1 JTHR_WSEL1/JME1 JCMOS1 JME1 SRTC_RST_PCH ASMB-813I User Manual...

  • Page 36: Pmbus Connector (Pmbus1)

    RTC_RST_PCH HDA_SDOUT_PCH 3.3V 2.17 PMBUS Connector (PMBUS1) PMBUS1 SMB_SCL_PM SMB_SDA_PM SMB_ALT_PM +3.3V ASMB-813I User Manual...

  • Page 37: Front Panel Smbus Connector (Smbus1)

    2.18 Front Panel SMBUS Connector (SMBUS1) SMBUS1 +3.3V_AUX SMB_SCL_FRU SMB_SDA_FRU 2.19 IPMI Module Connector (BMC1)* IPM1 IPM1 Note! This connector will only fit to ASMB-BMC-00A1E and only exist in ASMB-813I sku. ASMB-813I User Manual...

  • Page 38: Volt1 Connector

    2.20 VOLT1 Connector VOLT1 VOLT1 connects to the alarm board of Advantech chassis. These alarm boards give warnings if a power supply or fan fails, if the chassis overheats, or if the backplane malfunctions. 5VSB +3.3V -12V +12V 2.21 GPIO Connector (GPIO1)
  • Page 39 ASMB-813I User Manual...
  • Page 40 ASMB-813I User Manual...

  • Page 41: Chapter 3 Ami Bios

    Chapter AMI BIOS...

  • Page 42: Introduction

    The Setup program uses a number of menus for making changes and turning the special features on or off. This chapter describes the basic navigation of the ASMB-813I setup screens. AMI's BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration.

  • Page 43: Bios Setup

    Date using the <Arrow> keys. Enter new values through the keyboard. Press the <Tab> key or the <Arrow> keys to move between fields. The date must be entered in MM/DD/YY format. The time must be entered in HH:MM:SS format. ASMB-813I User Manual...

  • Page 44: Advanced Bios Features Setup

    3.2.2 Advanced BIOS Features Setup Select the Advanced tab from the ASMB-813I setup screen to enter the Advanced BIOS setup screen. You can select any of the items in the left frame of the screen, such as CPU configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the <Arrow>...
  • Page 45 3.2.2.1 ACPI Settings  Enable Hibernation "Enable or disable" Hibernation.  Lock Legacy Resources "Enable" or "Disable" Lock Legacy Resources. ASMB-813I User Manual...
  • Page 46 3.2.2.2 NCT6776 Super IO Configuration  Serial Port 1 Configuration – Serial Port "Enable" or "Disable" Serial Port 1. – Change Settings To select an optimal setting for serial port 1. ASMB-813I User Manual...
  • Page 47 The default of CPU/System FAN is Smart FAN IV mode and the BIOS will auto- matically control the FAN speed by CPU temperature. When set to manual mode, fan duty setting can be changed; the range is from 30%~100%, default setting is 50%. ASMB-813I User Manual...
  • Page 48 3.2.2.4 Serial Port Console Redirection  Console Redirection To "Enable or disable" console redirection feature. ASMB-813I User Manual...
  • Page 49 Options available: None/Hardware RTS/CTS. – Recorder Mode When this mode enabled, only text will be send. This is to capture Terminal data. Options available: Enabled/Disabled. – Legacy OS Redirection Resolution ASMB-813I User Manual...
  • Page 50 "9600", "19200", "57600", or "115200". "115200" is the default set- ting. – Flow Control Flow control can prevent data loss from buffer overflow. It can be set as "None", "Hardware RTS/CTS", or "Software Xon/Xoff". "None" is the default setting. ASMB-813I User Manual...
  • Page 51 Value in units of PCI clocks for PCI device latency timer register.  Above 4G Decoding Enables or disables 64-bit capability. Devices to be decoded in above 4G address space (Only if system supports 64-bit PCI decoding). Note! Some graphic or GPU cards need to enable 4G Decoding. ASMB-813I User Manual...
  • Page 52 "UPON RQUEST", GA20 can be disabled using BIOS services. When it's set as "Always", it does not allow disabling GA20.  Option ROM Messages "Force BIOS or Keep Current" to set the display mode for Option ROM ASMB-813I User Manual...
  • Page 53 3.2.2.7 Trusted Computing  Security Device Support Enables or disables BIOS support for security device. Purchase Advantech LPC TPM module to enable TPM function. P/N: PCATPM- 00A1E. 3.2.2.8 USB Configuration ASMB-813I User Manual...

  • Page 54: Intelrcsetup

    Selects the USB transfer time-out value. [1,5,10,20sec]  Device Reset Time-out Selects the USB device reset time-out value. [10,20,30,40 sec]  Device Power-up Delay This item appears only when Device power-up delay item is set to [manual]. 3.2.3 IntelRCSetup ASMB-813I User Manual...
  • Page 55 You may choose to enable or disable it.  DCU Streamer Prefetcher Enable prefetch of next L1 data line based upon multiple loads in same cache line.  DCU IP Prefetcher ASMB-813I User Manual...
  • Page 56 This item is to enable or disable CPU advanced encryption standard instruc- tions. 3.2.3.2 Advanced Power Management  Power Technology Power technology default is "Energy Efficient". User can set "EIST", "P-STATE", "C3", "C6", "Package C State limit" under "Custom" Mode. ASMB-813I User Manual...
  • Page 57 ASMB-813I User Manual...
  • Page 58 3.2.3.3 QPI Configuration ASMB-813I User Manual...
  • Page 59 Select the QPI link speed as either the Fast mode or Slow Mode.  QPI Frequency Select Allows for selecting the QPI Link frequency.  QPI Link0p Enable/Disable QPI Link0p.  QPI Link1 Enable/Disable QPI Link1.  COD enable Enable/Disable Cluster on Die.  Early Snoop Enable/Disable Early Snoop. ASMB-813I User Manual...
  • Page 60 Cluster on Die Enable Early Snoop Mode Early Snoop (ES) Disable Enable Auto Auto Auto Enable Disable Auto Home Snoop (HS) Disable Disable Auto Disable Cluster on Die (COD) Enable Disable Enable Auto Not Supported - Invalid Settings Enable Enable ASMB-813I User Manual...
  • Page 61 3.2.3.4 Memory Configuration  Data Scrabbling Enable/Disable Data Scrambling.  NUMA Enable/Disable non uniform memory access (NUMA).  Memory Technology Display memory topology with DIMM population information. ASMB-813I User Manual...
  • Page 62 3.2.3.5 I/O Configuration  CPU PCIe Configuration PCIe port bifurcation control and select target link speed as Gen1, Gen2, Gen3. ASMB-813I User Manual...
  • Page 63 XHCI Mode Mode of operation of XHCI controller.  Azalia HD Audio Enable/Disable Azalia HD audio function.  PCIe Slot 1/7 Configuration To enable or disable PCI Express Slot 1/7 and select target link speed as Gen1, Gen2. ASMB-813I User Manual...
  • Page 64 PCH SATA and sSATA Configuration – SATA Controller(s) This item is to enable or disable SATA devices. – Configure SATA Mode Set as IDE, AHCI, or RAID when SATA Controllers are enabled. – Support Aggressive Link Power Management ASMB-813I User Manual...
  • Page 65 LAN1 Controller Enable/Disable Intel I210 Controller support. – LAN1 PXE OpROM Enable/Disable Boot option for Intel I210 controller. – LAN2 Controller Enable/Disable Intel I210 Controller support. – LAN2 PXE OpROM Enable/Disable Boot option for Intel I210 controller. ASMB-813I User Manual...

  • Page 66: Server Management

    3.2.3.7 Server ME Configuration This page shows the Server ME configuration 3.2.4 Server Management  BMC Support Enable/Disable interfaces to communicate with BMC  Wait for BMC ASMB-813I User Manual...
  • Page 67 Select the action to be taken when log is full. 3.2.4.3 BMC Network Configuration  Configuration Address Source Select to configure LAN channel parameters statically or dynamically (by BMC). Unspecified option will not modify any BMC network parameters during BIOS ASMB-813I User Manual...

  • Page 68: Security

    Note! With AC power & Battery. Short CMOS1 Jumper: Date/Time & Password: Keep Setting: reset to default AC power and CMOS battery are removed. Short CMOS1 Jumper: Date/Time: reset to default Password: Keep Setting: reset to default ASMB-813I User Manual...

  • Page 69: Boot

    Number of seconds to wait for setup activation key. 16 (0x10) means indefinite wait- ing. 3.2.6.2 Bootup NumLock State Select the keyboard NumLock state. 3.2.6.3 Quiet Boot Enable/Disable quiet boot option. 3.2.6.4 Boot Option Priorities Sets the system boot priorities. ASMB-813I User Manual...

  • Page 70: Save & Exit

    Restore Defaults Restore/Load default values for all the setup options 3.2.7.8 Save as User Defaults Save the changes done so far as user defaults 3.2.7.9 Restore User Defaults Restore the user default to all the setup options ASMB-813I User Manual...

  • Page 71: Chipset Software Installation Utility

    Chapter Chipset Software Installation Utility...

  • Page 72: Before Beginning

    Before Beginning To facilitate the installation of the enhanced display drivers and utility software, read the instructions in this chapter carefully. The drivers for the ASMB-813I are located on the software installation CD. Before beginning, it is important to note that most display drivers need to have the relevant software application already installed on the system prior to installing the enhanced display drivers.

  • Page 73: Windows 7 & 8/ Windows Server 2008 & 2012

    Insert the driver CD into your system's CD-ROM drive. When the folder is dis- played, move the mouse cursor over the folder "01_Intel INF". Find the execut- able in the CSI folder, click to install the driver. ASMB-813I User Manual...
  • Page 74 Click setup to execute program. ASMB-813I User Manual...

  • Page 75: Vga Setup

    Chapter VGA Setup...

  • Page 76: Introduction

    Insert the driver CD into your system's CD-ROM drive. When the folder is displayed, navigate to the "02_Graphic chip" folder and click the executable file to complete the installation of the drivers for OS that you need. ASMB-813I User Manual...
  • Page 77 Note! If ASMB-813I carries an additional graphics card for VGA output, please set this additional graphic card as "major output" under the "Display properties" of OS. Please use the driver file from "Windows WDDM" folder as first choice. XDDM and WDDM Driver Selection for Win7/Vista/2008/2008R2 –...
  • Page 78 ASMB-813I User Manual...

  • Page 79: Lan Configuration & Usb 3.0

    Chapter LAN Configuration & USB 3.0...

  • Page 80: Lan Configuration

    6.1.1 Introduction The ASMB-813I has two Gigabit Ethernet LAN connections via dedicated PCI Express x1 lanes: GbE LAN1 - Intel I210; GbE LAN2 - I210. They offer bandwidth of up to 500 MB/sec, eliminating the bottleneck of network data flow and incorporating Gigabit Ethernet at 1000 Mbps.

  • Page 81: Usb 3.0

    USB 3.0 6.2.1 Introduction ASMB-813I offers six USB 3.0 ports, four in rear side and two via onboard header. The USB 3.0 could provide the bandwidth up to 500MB/s to shorter the time for data transmission. 6.2.2 Windows Series Driver Setup Insert the driver CD into your system's CD-ROM drive.

  • Page 82: Ahci & Sata Raid

    Please visit the Intel download center for "Intel Rapid Storage Technology enterprise for Microsoft Windows Operating System Software User's Guide" file download, The download address is: http://download.intel.com/support/moth- erboards/server/sb/g40440_005_rste_swug_r1_5.pdf For the hotfix file download, please visit: http://support.micro- soft.com/kb/932755/en-us ASMB-813I User Manual...

  • Page 83: Appendix A Programming The Watchdog Timer

    Appendix Programming the Watchdog Timer...

  • Page 84: Watchdog Timer Overview

    The ASMB-813I’s watchdog timer can be used to monitor system software operation and take corrective action if the software fails to function within the programmed period. This section describes the operation of the watchdog timer and how to pro- gram it.
  • Page 85 Unlock NCT6776D Select watchdog timer register Enable the watchdog timer function Use the watchdog timer function Lock NCT6776D ASMB-813I User Manual...

  • Page 86: Example Programs

    Mov al,07h ; Select registers of watchdog timer Out dx,al Inc dx in al,dx Or al,08h Out dx,al ;----------------------------------------------------------- Dec dx; Enable the function of watchdog timer Mov al,30h Out dx,al Inc dx Mov al,01h Out dx,al ;----------------------------------------------------------- ASMB-813I User Manual...
  • Page 87 Dec dx ; Enable the function of watchdog timer Mov al,30h Out dx,al Inc dx Mov al,01h Out dx,al ;----------------------------------------------------------- Dec dx ; Set minute as counting unit Mov al,0f5h Out dx, al Inc dx In al,dx Or al, 08h ASMB-813I User Manual...
  • Page 88 Dec dx ; Enable watchdog timer to be reset by mouse Mov al,0f7h Out dx,al Inc dx In al,dx Or al,80h Out dx,al ;----------------------------------------------------------- Dec dx ; lock NCT6776D Mov al,0aah Out dx,al Enable watchdog timer to be reset by keyboard ASMB-813I User Manual...
  • Page 89 Mov dx,2eh ; unlock NCT6776D Mov al,87h Out dx,al Out dx,al ;----------------------------------------------------------- Mov al,07h ; Select registers of watchdog timer Out dx,al Inc dx Mov al,08h Out dx,al ;----------------------------------------------------------- Dec dx ; Enable the function of watchdog timer Mov al,30h ASMB-813I User Manual...
  • Page 90 Dec dx ; Generate a time-out signal Mov al,0f7h Out dx,al ;Write 1 to bit 5 of F7 register Inc dx In al,dx Or al,20h Out dx,al ;----------------------------------------------------------- Dec dx ; lock NCT6776D Mov al,0aah Out dx,al ASMB-813I User Manual...

  • Page 91: Appendix B I/O Pin Assignments

    Appendix I/O Pin Assignments...

  • Page 92: Usb Header (Usb89)

    USB Header (USB89) USB89 Table B.1: USB Header (USB89) Signal Signal USB_VCC5 USB_VCC5 USB_D- USB_D- USB_D+ USB_D+ USB3.0 Header(USB6_7) Table B.2: USB Header (USB67) Signal Signal +5 V STDA_SSRX- STDA_SSRX+ STDA_SSRX- STDA_SSRX+ STDA_SSRX+ STDA_SSRX- STDA_SSRX+ STDA_SSRX- +5 V ASMB-813I User Manual...

  • Page 93: Vga Connector (Vga1)

    VGA Connector (VGA1) Table B.3: VGA Connector (VGA1) Signal Signal GREEN BLUE H-SYNC V-SYNC RS-232 Interface (COM2) Table B.4: RS-232 Interface (COM2) Signal ASMB-813I User Manual...

  • Page 94: External Keyboard Connector (Kbms2)

    MS DATA MS CLK System & CPU Fan Power Connector (SYSFAN0~2, CPUFAN0) Table B.6: Fan Power Connector (SYSFAN0~2, CPUFAN0) Signal +12 V DETECT Power LED (JFP3) Table B.7: Power LED (JFP3) Function LED power (3.3 V) Ground ASMB-813I User Manual...

  • Page 95: External Speaker Connector (Jfp2)

    1 4 7 10 Table B.8: External Speaker Connector (JFP2) Function SPK+ SPK- Reset Connector (JFP1) 9 12 Table B.9: Reset Connector (JFP1) Signal RESET B.10 HDD LED Connector (JFP1) Table B.10: HDD LED Connector (JFP1) Signal HDD_LED+ HDD_LED- ASMB-813I User Manual...

  • Page 96: Atx Soft Power Switch (Jfp1)

    B.11 ATX Soft Power Switch (JFP1) Table B.11: ATX Soft Power Switch (JFP1) Signal PWR-BTN B.12 Front panel SMBus Connector (SMBUS1) +3.3V_AUX SMB_SCL_FRU SMB_SDA_FRU ASMB-813I User Manual...

  • Page 97: Usb/Lan Ports (Usb0_1, Usb2_3,Usb4_5 And Lan1_2_3)

    Table B.12: USB Port Signal Signal VCC_DUAL_1 USB2_Data1- USB2_Data1+ USB3_RX_1- USB3_RX_1+ USB3_TX_1- USB3_TX_1+ VCC_DUAL_2 USB2_Data2- USB2_Data2+ USB3_RX_2- USB3_RX_2+ USB3_TX_2- USB3_TX_2+ Table B.13: Giga LAN 10/100/1000 Base-T RJ-45 Port Signal Signal MID0+ MID2+ MID0- MID2+ MID1+ MID3+ MID1- MID3+ ASMB-813I User Manual...

  • Page 98: Audio Connector (Hdaud1)

    ACZ_SDOUT ACZ_SDIN0 ACZ_SDIN1 ACZ_RST ACZ_12V B.15 8-pin Alarm Board Connector (VOLT1) Table B.15: 8-pin Alarm Board Connector (VOLT1) Signal Signal 5VSB +3.3V -12V +12V B.16 Case Open Connector (JFP1) Table B.16: Case Open Connector (JFP1) Signal CASEOP ASMB-813I User Manual...

  • Page 99: Front Panel Lan Led Connector (Lanled1)

    B.17 Front Panel LAN LED Connector (LANLED1) Table B.17: LAN LED Connector (LANLED1) Signal Signal LAN1_LED0_ACT LAN2_LED1_ACT VCC3_LAN1LED VCC3_LAN2LED LAN1_LED1_1000M LAN2_LED2_1000 LAN1_LED2_100M LAN2_LED0_100 VCC3 ASMB-813I User Manual...
  • Page 100 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2015...

Table of Contents