Setting The Key Sound; Screen Saver - Aastra DT390 User Manual

USER GUIDE
16.1.4
16.2
16.2.1
1424-EN/LZT 103 087 Uen G 2014-04-14
2. Select Sound & Alerts, and press Select.
3. Select Vibrating alert, and press Select.
4. Choose between On, On when silent (the vibrator is on when the
phone is muted), or Off, and press Select.
5. Press Back to save the setting.

Setting the Key Sound

Setting the key sound means that each time a key is used, the phone
gives a small sound. To enable this function, do the following:
1. Press Menu, select
2. Select Sounds & Alerts, and press Select.
3. Select Key sound, and press Select.
4. Choose between Click, Tone or Silent.
It is possible to listen to the key sound by pressing Play.
5. Press Select.
6. Press Back to save the setting.
Display
Display settings include contrast settings.

Screen saver

The screen saver can be set to one of the following settings:
• Information: Displays status and identification information while the
handset is idle.
• Black: The screen is black when the handset is idle.
• Black also in call: The screen is also black when the handset is in
call.
To set the screen saver, do the following:
1. Press Menu, select
2. Select Display, and press Select.
3. Select Screen saver, and press Select.
, and press Select.
, and press Select.
89