Aastra DT390 User Manual page 60

10.10.2
10.11
1424-EN/LZT 103 087 Uen G 2014-04-14
The ongoing call is put on hold and your phone rings to announce
the waiting call.
Note: R is default for this function. If this soft key is reprogrammed to
something other than R, this function is disabled.
2. Press to finish the call.
Wait for the system to recall the first party.
Terminating the Ongoing Call
To terminate the ongoing call and answer the waiting call, do the
following:
1. Press to finish the ongoing call.
The waiting call is signalled on your phone
2. Press to answer the new call.
Conference
The conference function allows up to 7 conference participants. Only the
conference leader (that is, the person initiating the conference) can
admit participants.
During the conference, a special tone will be heard every 15 seconds as
a reminder of the ongoing conference. Each time a participant enters or
leaves the conference, a burst tone is heard.
When the conference leader leaves the conference, the conference will
continue with the other included parties. When only two participants are
left, the conversation is changed back to a normal two party connection.
Note: This feature needs to be configured in the WinPDM or CPDM3 by
the system administrator.
When you have an ongoing conversation and want to establish a phone
conference, do the following:
1. Press More, select New Call, and press Select.
This will put the first call on hold.
2. Dial the number, and press
When the third party has answered, continue with the following to
establish a conference:
3. Press More, select Conference and press Select.
.
D C
URING ALLS
60