Deactivating Phone Lock; Changing Pin Code; Changing The Owner Id - Aastra DT390 User Manual

USER GUIDE
16.4.4
16.4.5
16.5
1424-EN/LZT 103 087 Uen G 2014-04-14
Note: .If configured in the handset, any of the pre-defined emergency
numbers can be called while the handset is locked.
If PIN code is lost it is possible to configure a new, or to do a
factory reset in WinPDM or CPDM3, contact the system adminis-
trator.

Deactivating Phone Lock

To deactivate the Phone lock function, do the following:
1. Press Menu, select
2. Select Locks and press Select.
3. Select Phone lock and press Select.
4. Select Auto phone lock and press Select.
5. Select Off, and press Select.
6. Enter the PIN code, press OK.

Changing PIN Code

To change PIN code, do the following:
1. Press Menu, select
2. Select Locks and press Select.
3. Select Phone lock and press Select.
4. Select Change PIN code and press Select.
5. Enter the old PIN code (default is 0000) and press OK.
6. Enter the new PIN code.
7. Enter the new PIN code again to confirm and press Save.
The following message is displayed: New PIN code saved.

Changing the Owner ID

The Owner ID is set to identify the phone. To change the owner ID, do
the following:
1. Press Menu, select
2. Select Owner ID, and press Select.
, and press Select.
, and press Select.
, and press Select.
93