Rules Of Status Definition - Motech LPS 505N User Manual

PROG:ISET1 1
PROG:ISET2 1
PROG:ISET3 1
PROG:VSET1 5
PROG:VSET2 5
PROG:VSET3 5
PROG:FAST 500
PROG:NEXT:END
PROG 13
PROG:ISET1 1
PROG:ISET2 1
PROG:ISET3 1
PROG:VSET1 7
PROG:VSET2 7
PROG:VSET3 7
PROG:FAST 1000
PROG:NEXT:JUMP 12
Q64. How to enable or disable DHCP?
CONT:DHCP ON
CONTROL:DHCP 1
CONT:DHCP 0
CONTROL:DHCP OFF
Q65. How to get the IP address?
CONT:IP?
CONTROL:IP?
Q66. How to set the IP address?
CONT:IP 192.168.10.1
CONTROL:IP 192.168.10.1

6.6 Rules of Status Definition

byte 0:
==> ch1 output up to 1 A
==> ch2 output up to 1 A
==> ch3 output up to 1 A
==> ch1 output 5V
==> ch2 output 5V
==> ch3 output 5V
==> output above setting for 500 ms
==> end the program
==> define program 13
==> ch1 output up to 1 A
==> ch2 output up to 1 A
==> ch3 output up to 1 A
==> ch1 output 7V
==> ch2 output 7V
==> ch3 output 7V
==> output the setting of program 13 for 1
==> jump to program 12
==> enable DHCP
==> enable DHCP
==> disable DHCP
==> disable DHCP
==> return the IP address
==> return the IP address
==> set up the IP address for PPS3210
==> set up the IP address
bit 7 channel 3 on/off status
bit 6 channel 2 on/off status
bit 5 channel 1 on/off status
bit 4 channel 3 OVP setting flag
bit 3 channel 2 OVP setting flag
second
37