Table of Contents
Advertisement
A. Using rotary or ◄►to move the cursor onto the digit and input the
number. Timer: 00:00:00 (HH:MM:SS)
B. Switching CH1/CH2/CH3 by press CH key. Then press rotary to
switch ON/OFF
C. Start Timer when press ON/OFF key
D. Press rotary + CLEAR to pause the timer. Restart by repeating the
same step
2. TRACKING: The initial value is OFF, switch to ON by pressing the
3. OVP setting: Over voltage protection. Press the rotary to enter OVP
10
rotary. The CH2 will have the same voltage and current
setting as the CH1.
Configuration. Press "CH" to select CH1/CH2/CH3.
Users can press ON/OFF to enable or disable OVP and
input the voltage value via the number keys. Please
remember to press rotary to save the settings.
Advertisement
Table of Contents
