Table of Contents
Advertisement
:CURRent[n]
[ level]
:PROTection
[?/ level]
:TRIGger
[ state/bool]
:VOLTage[n]
[ level]
:PROTection
[?/ level]
:TRIGger
[ state/bool]
example:
Q20. How to set tracking mode?
OUT:TRACK
Q21. How to set serial output mode?
OUT:SER
OUT:SERIAL
Q22. How to set parallel output mode?
OUT:PARA
OUT:PARALLEL
Q23. How to resume normal output mode?
OUT:NORM
OUT:NORMAL
Q24. How to read back machine status?
STATUS?
Q25. How to read back machine error code?
STAT:ERR?
STATUS:ERR?
STATUS:ERROR?
30
Set the floating point value of the DC output
current in amps for channel n: 1 - 3.
current level: 0 – 3A for ch1 and ch2, 0 – 5A
for ch3
over current protection (OCP)
return or set the over current in amps
trigger current protection
ON/1 (enable) or OFF/0 (disable) OCP
Sets the floating point value of the DC
output voltage in volts for channel n: 1 - 3.
voltage level: 0 – 32V for ch1 and ch2, 0 –
15V for ch3
over voltage protection (OVP)
return or set the over voltage in volts
trigger voltage protection
ON/1 (enable) or OFF/0 (disable) OVP
Advertisement
Table of Contents
