Q8. How to read the current output value?
CURR3?
CURRENT1?
IOUT2?
IOUT?
Q9. How to set the tracking mode?
TRACK 1
TRACK ON
TRACK 0
TRACK OFF
Q10. How to set the parallel output mode?
PARA 1
PARALLEL ON
PARA 0
PARALLEL OFF
Q11. How to set the serial output mode?
SER 1
SERIAL ON
SER 0
SERIAL OFF
Q12. How to read back calibration parameter?
CAL?
CALI?
Q13. How to lock keypad and knob?
LOCK 1
LOCK ON
Q14. How to read back address number?
ADDR?
ADDRESS?
==> return channel 3 current output
==> return channel 1 current output
==> return channel 2 current output
==> return channel 1 current output
==> CH2 = CH1
==> CH2 = CH1
==> tracking off
==> tracking off
==> parallel on
==> parallel on
==> parallel off
==> parallel off
==> serial on
==> serial on
==> serial off
==> serial off
==> return the calibration data
==> return the calibration data
==> lock the keypad and knob
==> lock the keypad and knob
25