5. Operation Setting
5.1 Voltage Setting
Press "CH" to select channel, there are CH1/CH2/CH3 to choose. (Please follow
the * sign in the left side of the LCD) Use the number key to input the voltage. And,
press "V" to finish the setting. The voltage will be set immediately.
5.2 Current Setting
Press "CH" to select Channel, there are CH1/CH2/CH3 to choose. (Please follow
the * sign in the left side of the LCD) Use the number key to input the current. And,
press "A" to finish the setting. The current will be set immediately.
5.3 OVP
Press "Config" to enter Configuration display, adjust rotary or ◄► to move the
cursor to OVP setting. Press rotary to enter OVP setting display. Users can press
"CH" to select channel of setting. (Please follow the * sign in the left side of the LCD)
Press the ON/OFF key to choose enable or disable. Use the number key to input
the voltage. Please remember to press rotary to finish the setting.
5.4 OCP
Press "Config" to enter Configuration display, adjust rotary or ◄► to move the
18