Table of Contents
Advertisement
7. DHCP: This parameter is for LAN port setting. The default value is
8. IP***.***.***.***: When the DHCP is off, it needs to set an IP
9. BEEP: Buzzer. Press rotary to switch the buzzer on or off.
12
"OFF" mode. You may change the mode by press the rotary.
At DHCP "ON" mode, a dynamic IP address can be obtained
from the server.
address for the LPS 505N if LAN is selected.
Users may use the ◄►keypads to locate
the cursor and then use the number keypads
to key-in the right IP address.
Advertisement
Table of Contents
