Motech LPS 505N User Manual page 39

STAT:ERROR?
Q26. How to read voltage setting DAC value?
STATUS:CVP?
Q27. How to read current setting DAC value?
STATUS:CCP?
Q28. How to read voltage DAC value?
STATUS:MONV?
Q29. How to read current DAC value?
STATUS:MONI?
Q30. How to set all channels to synchronously output?
OUT:ALL 1
OUT:ALL OFF
Q31. How to set up timer?
TIMER 00:10:00
TIM 99:59:59
Q32. How to start the timer?
TIMER ON
TIM ON
Q33. How to stop the timer?
TIMER OFF
TIM OFF
Q34. How to read timer parameter?
TIMER?
TIM?
Q35. How to set up a program (example)?
step 1: PROG 10
step 2: PROG:VSET1 16V
step 3: PROG:VSET2 25V
step 4: PROG:VSET3 3.3V
==> read CVP DAC value
==> read CCP DAC value
==> read MONV DAC value
==> read MONI DAC value
==> tri-channel output is ON
==> tri-channel output is OFF
==> set up the timer to run for 10 minutes
==> set up timer to run 99 hours 59 minutes 59
seconds and then stop
==> select program number 10, program
number shall be in 0 ~ 99.
==> set output voltage to 16v for ch1
==> set output voltage to 25v for ch2
==> set output voltage to 3.3v for ch3
31