Motech LPS 505N User Manual page 17

Selecting CH1/CH2/CH3
(5) ON/OFF:
This keypad is used to turn the output power on or off.
(6) Number Key:
Input number by number key. To set the voltage or current, press the
"V" or "A" key after the number input.
(7) ►(STORE):
This keypad has two (2) functions. When the output is on, this key is
used to move the cursor to select the digit to be adjusted. Users then
adjust the digit by turning the rotary. When in memory function, this
keypad is used to store the current configuration into the memory
simply by pressing it.
(8) ◄(RECALL):
This keypad has two (2) functions also. When the output is on, press
this key to move the cursor to the selected digit and then turning the
rotary to adjust the value of the digit. When in memory function, by
pressing this key to recall a stored configuration from the memory.
(9) DISP:
Press this key to select the display to show the voltage/current or
power/resistance readout.
(10) V(Voltage):
Press this key to set voltage after number input.
(11) A(Current):
Press this key to set current after number input.
(12) Config:
Press this key to enter the configuration setting. There 16 items to be
set in this mode.
1. Timer: The initial value is OFF. Press the rotary to enter timer
configuration.
9