Motech LPS 505N User Manual page 36

[?/ hh:mm:ss]
:FASTimer
[ level]
:NEXT
[?]
:END
:NEXT
:JUMP[ n]
:SAVe
TIMer
[?]
[ ON/OFF]
[ hh:mm:ss]
:TIMER?
:PAUSE
MEMory
[ n]
[?]
:VSET[n]
[ level]
:ISET[n]
[ level]
:SERial?
:PWD
:PASSword
[ string]
:PWD?
:PASSword?
:SAVE
CONTrol
:LCD
[ state/bool]
:FASTREQ
28
set up timer for fast action
unit is millisecond, range from 4~65535ms
next step
return the next program number
end current program
next program number = current program
number + 1
jump to program number n: 0 ~ 99
save programmable 0 ~ programmable 99
value
timer subsystem
return timer setting
enable/disable timer
set up timer
Respone current timer parameter
stop running the timer
memory subsystem
select [n] page memory number, n range
from 0 ~ 99
read back memory page[n] parameters
volt setting for channel n: 1 - 3
voltage level: 0 – 32V for ch1 and ch2, 0 –
15V for ch3
current setting for channel n
current level: 0 – 3A for ch1 and ch2, 0 – 5A
for ch3
read back serial number
set up password
the string must be less than 15 characters
return password
store memory subsystem parameters
control subsystem
turn ON (1) or OFF (0) the LCD backlight
ON/1 (enable) or OFF/0 (disable) fast output
mode