Scpi Compatiable Information; Scpi Frequent Command - Motech LPS 505N User Manual

6.5 SCPI Compatiable Information

The SCPI conforms to all specifications for devices as defined in IEEE-488.2 and
complies with SCPI command syntax version 1995.0. Confirmed Commands are
those commands which are approved commands in the SCPI 1995 Specification,
Volume 2: Command Reference.

6.5.1 SCPI Frequent Command

Command Description
===========================================================
*CLS Clear status (include error code)
*CAL? As same as CALi? command,return calibration parameter
*IDN? Response:<Manufacturer>, <model>, <serial number>,
<firmware type, & version>
*RCL Recalls settings from memory. Memory numbers from 0 to 99 are
valid.
*RST Resets the power supply to its power on state.
*SAV 1. Saves defined parameters
2. Saves current settings to memory. Memory numbers from 0 to
99 are valid.
*WAI Sets the device to wait until all previous commands and queries
are complete before executing commands following the *WAI
command.
example:
Q15. How to save V/I to memory?
*SAV 15
SAV 0
Q16. How to recall memory V/I variable to output?
*RCL 3
RCL 120
Q17. How to save configuration parameters?
SAV
26
==> Saves current settings to memory
number 15
==> Saves current settings to memory
number 0
==> recall setting from memory location 3
==> the data value is invalid