Motech LPS 505N User Manual page 32

VSET2?
VSET3
VSET3?
example:
Q1. How to set the GPIB address?
ADDR 10
ADDRESS 5
ADDR 70
Q2. How to set beep?
BEEP 1
BEEP off
Q3. How to set voltage?
VSET 10
VSET2 5.123
VOLT3 3.3V
VOLTAGE1 35
Q4. How to read the voltage setting value?
VSET?
VSET2?
Q5. How to set current?
ISET 1.1
ISET2 2.1A
CURR3 4.3022
CURRENT1 0.250
Q6. How to read the current setting value?
ISET?
ISET2?
Q7. How to read the voltage output value?
VOLT3?
VOLTAGE1?
VOUT2?
VOUT?
24
return channel 2 voltage setting
channel 3 voltage setting
return channel 3 voltage setting
==> address is 10
==> address is 5
==> address is out of maximum value, refer
==> set beep to on
==> set beep to off
==> set channel 1 voltage to 10V
==> set channel 2 voltage to 5.123V
==> set channel 3 voltage to 3.3V
==> set channel 1 voltage to 35V is fail,
==> return channel 1 voltage setting
==> return channel 2 voltage setting
==> set channel 1 current to 1.1A
==> set channel 2 current to 2.1A
==> set channel 3 current to 4.3022A
==> set channel 1 current to 250mA
==> return channel 1 current setting
==> return channel 2 current setting
==> return channel 3 voltage output
==> return channel 1 voltage output
==> return channel 2 voltage output
==> return channel 1 voltage output
to error code
because out of range