Table of Contents
Advertisement
PCAN-Router Pro – User Manual
7
Firmware Update
An update of the firmware for the PCAN-Router Pro can be done via
a connected CAN bus. Prerequisite is a computer with a CAN inter-
face of the PCAN series.
Ask our technical support for the current firmware version and
instructions for updating:
E-mail: support@peak-system.com
Phone and postal address: see on page 2.
The configurations saved on the device are kept at a firmware up-
date, provided that the general format of configurations does not
change with the new firmware. Note the readme file to the new
firmware version.
If the configuration format has changed, after a firmware update
and a restart of the PCAN-Router Pro the LED μC Status blinks with
higher frequency (2 Hz, compared to 1 Hz during normal operation).
After that you need to re-transfer the accordingly adjusted configu-
ration(s) to the PCAN-Router Pro with the PPCAN-Editor.
33
Advertisement
Table of Contents
Need help?
Do you have a question about the PCAN-Router Pro and is the answer not in the manual?