Sleep Mode - Peak PCAN-Router Pro User Manual

PCAN-Router Pro – User Manual
5.7

Sleep Mode

In sleep mode the voltage supply is turned off for a majority of the
electronics in the PCAN-Router Pro and the current consumption is
reduced to 470 μA at 12 V. The Power LED is off.
To put the PCAN-Router Pro from active status to sleep mode, in a
configuration you need to define a CAN message with a symbol that
is assigned to the I/O function
is activated by default.
If no CAN transceiver module with wake-up function is present in
the PCAN-Router Pro and no external wake-up signal is present, the
sleep mode also occurs in the following cases:
after applying a supply voltage (reset)
after a transient voltage drop (reset)
70h (Special Out) > SelfHold
28
. Selfhold