Rfc 2684 Bridged (Pure Bridge) Configuration; Rfc 2684 Bridged (Static Ip) Configuration - Huawei SmartAX MT880 User Manual

DNS
DHCP Mode
IP Address and
Network Mask
DNS
5.4 RFC 2684 Bridged (Pure Bridge)
Configuration
Location
ATM Setting
PPPoE Dial–up
Application

5.5 RFC 2684 Bridged (Static IP) Configuration

Location
ATM Setting
It is recommended to have DNS Relay function enabled.
It is recommended to have DHCP Server function enabled.
Configurations on the user PC
It is recommended to set the mode as obtaining an IP address
automatically.
It is recommended to set the mode as obtaining a DNS server's IP
address automatically.
Configurations on MT880
Parameters
PVC
VPI/VCI
Operation Mode
Encapsulation
Connection Type
Address Type
Configurations on the user PC
Before connecting to the Internet, the user shall have PPPoE dial–up
application installed on the PC.
Configurations on MT880
Parameters
PVC
VPI/VCI
Operation Mode
Encapsulation
Connection Type
Address Type
IP Address and
Subnet Mast
Default Route
Comments
Select any one from the eight PVCs.
The value shall be provided by your ISP.
Select "Enable".
The value shall be provided by your ISP. Usually
you can keep the default value:LLC.
Select "RFC2684 Bridged".
Select "Pure Bridge".
Comments
Select any one from the eight PVCs.
The value shall be provided by your ISP.
Select "Enable".
The value shall be provided by your ISP. Usually
you can keep the default value:LLC.
Select "RFC2684 Bridged".
Select "Static IP".
The values shall be provided by your ISP.
Select "Enable".
5-3