Steps - Huawei SmartAX MT880 User Manual

Name
The DHCP mode of the
MT880

3.6.2 Steps

1. Configuring the MT880
Do as follows to configure the MT880:
(1) Log in to the Web configuration page. For the method, refer
to 2.3 "Establishing Configuration Environment".
(2) Select Basic > WAN Settings in the navigation tree to
display the WAN configuration page.
(3) Select the PVC, which needs configuring, in the WAN
configuration page. Click the editing icon of the PVC to open
the change page.
(4) Select Bridged+DHCP in the PVC change page. Set the
operation mode to Enable. Configure relevant parameters
in Figure 3-4 according to the values in the Table 3-4.
Enable the DHCP server
Figure 3-4 Configuring the DHCP mode
Configuration
22