Configuring The Pppoe Mode; Preparation - Huawei SmartAX MT880 User Manual

(4) Select Connect to the Internet and click Next.
(5) Select Set up my connection manually and click Next.
(6) Select Connect using a broadband connection that
requires a username and password and click Next.
(7) Enter the name of the connection you are creating. Then
click Next.
(8) Select Anyone's use or My use only and click Next.
(9) Enter the username and password. Then click Next.
(10) Click Finish.

3.4 Configuring the PPPoE Mode

In the PPPoE mode, the MT880 uses the built-in PPP dial-up
software to dial a number. The MT880 serves as a router to connect
your computer to the network.
This chapter introduces how to configure the MT880 to work in the
PPPoE mode and how to configure your computer to access the
network through the MT880.

3.4.1 Preparation

Table 3-3 shows the configuration preparation.
Name
PVC mode
PVC operation mode
Default route
DNS
VPI/VCI
Encapsulation
Table 3-3 Configuration for the PPPoE mode
Configuration
PPPoE
Enable
Enable
Enable
Provided by the ISP
Provided by the ISP
18