Steps - Huawei SmartAX MT880 User Manual

Name
Username and password for the
PPPoE dial-up
DHCP mode of the MT880
Note:
After the DHCP server is enabled, the MT880 can allocate the private
IP address for the computer.

3.4.2 Steps

1. Configuring the MT880
Do as follows to configure the MT880:
(1) Log in to the Web configuration page. For the method, refer
to 2.3 "Establishing Configuration Environment".
(2) Select Basic > WAN Settings in the navigation tree to
display the WAN configuration page.
(3) Select the PVC, which needs configuring, in the WAN
configuration page. Click the editing icon of the PVC to open
the change page.
(4) Select PPPoE in the PVC change page. Set the operation
mode to Enable. Configure relevant parameters in
Figure 3-3 according to the values in the Table 3-3.
Configuration
Provided by the ISP
Enable the DHCP server
19