Service Modes Of The Mt880 - Huawei SmartAX MT880 User Manual

3.2 Service Modes of the MT880

The MT880 supports multiple service modes. Select a service
mode by considering the configuration of the DSLAM in the office end
and referring to Table 3-1.
Table 3-1 the MT880 service model introduction
Service
Mode
Pure
bridge
PPPoE
PPPoA
DHCP
Static IP
Working Method
Take the MT880 as pure bridge
equipment.
Use the PPPoE dial-up software of the
computer to dial a number.
Take the MT880 as a router.
Use the built-in PPPoE dial-up software
of the MT880 to dial a number.
Use the PPPoE/PPPoA encapsulation
mode to encapsulate the packets.
Take the MT880 as a router.
Use the PPPoE dial-up software of the
MT880 to dial a number.
Use the PPPoA encapsulation mode to
encapsulate the packets.
Take the MT880 as a router.
The IP address for the MT880 to
access the Internet is dynamically
allocated by the ISP.
Use the IPoE/IPoA
mode to encapsulate the packets.
Take the MT880 as a router.
The MT880 uses the static public IP
address to access the Internet.
Use the IPoE/IPoA
mode to encapsulate the packets.
encapsulation
encapsulation
14
Configuration
Refer to 3.3
"Configuring the
Pure Bridge
Mode".
Refer to 3.4
"Configuring the
PPPoE Mode".
Refer to 3.5
"Configure the
PPPoA mode".
Refer to 3.6
Configuring the
DHCP Mode".
Refer to 3.7
"Configuring the
Static IP Mode".