Steps - Huawei SmartAX MT880 User Manual

From the table, you can know that the transmission of the MT880
and the DSLAM is based on the Asynchronous Transfer Mode (ATM).
To realize all kinds of service modes of the MT880, configure
parameters of the MT880. For example, configure the Permanent
Virtual Channel (PVC) parameter.

3.1.2 Steps

By configuring the working parameters of the MT880, different
service modes can be realized.
Follow the steps to realize a service mode.
Step To...
Establish the
1 configuration
environment
Configure the
2
MT880
Configure your
3
computer
Note:
NIC = Network Interface Card
DHCP = Dynamic Host Configuration Protocol
Refer to 2.3 "Establishing Configuration
Environment".
(1) Select the PVC which needs configuring.
(2) Select the service model of this PVC and
configure the working parameters of the
PVC.
(3) Configure
requirement.
For example, configure the DHCP function.
(4) Save the configuration and reboot the
MT880.
Configure the working parameters of the
computer NIC or install the dial-up software in the
computer according to the service mode of the
MT880.
13
Do...
functions according to the