Steps - Huawei SmartAX MT880 User Manual

Name
IP address/subnet
mask
IP address of the
gateway
DHCP mode of the
MT880

3.7.2 Steps

1. Configuring the MT880
Do as follows to configure the MT880:
(1) Log in to the Web configuration page. For the method, refer
to 2.3 "Establishing Configuration Environment".
(2) Select Basic > WAN Settings in the navigation tree to
display the WAN configuration page.
(3) Select the PVC, which needs configuring, in the WAN
configuration page. Click the editing icon of the PVC to open
the change page.
(4) Select Bridged+Static IP in the PVC change page. Set the
operation mode to Enable. Configure relevant parameters
in Figure 3-5 according to the values in the Table 3-5.
IP address and subnet mask for the MT880 to
access the network are provided by the ISP
IP address of the gateway for the MT880 to access
the network is provided by the ISP
Enable the DHCP server
24
Configuration