Maytag MER5775QAS Manual page 10

To cancel the CJockdispmay:
If you do not want the time of day to dispHay:
Press and hoHdthe CANCEL and CHock
pads for three seconds. The time of day
wiHH disappear from the dispHay
When the chock dispHayis cancelled, press
the CHockpad to briefly dispHaythe time
of day.
To restore the CJock display:
Press and hoHdthe CANCEL and CHockpads for three sec-
onds. The time of day wiHH reappear in the dispHay.
The timer can be set from one minute (0:01) up to 99 hours
and 59 minutes (99:59).
The timer can be used independentHy of any other oven
activity'. It can aHsobe set whiHeanother oven function is
operating.
The Timer does not controHthe oven. It onHycontroHsa
beeper,
Timer
To set the Timer:
1. Press the Timer pad.
° 0:00 Hightsin the dispHay.
° The coHonwiHH flash.
2.
Press the More+ or Less- pad until the L_:'ss-
correct time appears in the dispHay. ........................................
° The coHon wiHH continue to flash,
3,
Press Timer pad again or wait four seconds.
° The coHoncontinues flashing and the time begins
counting down.
° The Hastminute of the timer countdown wiHH be dispHayed
as seconds.
4. At the end of the set time, one Hongbeep wiHH sound.
To cancel the Timec:
1. Press and hoHdthe Timer pad for three seconds.
OR
2, Press the Timer pad and set the time to 0:00,
Locking the Control
and Oven Dooc
The touchpad controls and oven door can be Hockedfor
safety, cleaning, or to prevent unwanted use. They will not
function when locked.
If the oven is currentHy in use, the controHsand door cannot be
Hocked.
The current time of day wiHH remain in the dispHaywhen the
controHsare Hocked.
To lock:
Press and hoHdthe CANCEL and Cook &
HoHdpads for three seconds. (Press
CANCEL pad first.[)
LOCK flashes in the dispHay.
To unlock:
Press and hoHdthe CANCEL and Cook & HoHdpads for three
seconds. (Press CANCEL pad first.)
LOCK disappears from the dispHay.
Fault Codes
BAKE or LOCK may flash rapidHyin the dispHayto aHertyou if
there is an error or a probHem. If BAKE or LOCK flash in the
dispHay,press CanceHpad. If BAKE or LOCK continue to flash,
disconnect power to the appHiance. Wait a few minutes, and
then reconnect power= If the flashing stiHH continues, discon-
nect power to the appHiance and caHH an authorized servicer.
9