Cylinder Head Removal; Camshaft Bearing Inspection; Camshaft Bushing Inspection - Honda ATC200S Workshop Manual

CYLINDER HEAD!VALVES
CAMSHAFT BEARING INSPECTION
lostall the cylinder head cover with
B
mm
nuu.
TO RQUE: 18- 20 N· m 0.8 - 2.0 kg.m,
13-14
ft·lb
I
Measu re the camshaft beariog 1 .0.
SERVICE LIMIT: 34.05 mm 11.341 iol
CalclJlate the camshaft-to -bearing clearance,
SERVICE LIMIT: 0.10 mm (0.004 in)
CAMSHAFT BUSHING INSPECTION
MeaslJre the cam.haft bushi ng I,D.
SERVICE LIMIT: 20.05 mm 10.789 in)
Calculate the camshaft bushing·to-camsha ft
clearaoce.
SERVICE LIMIT: O.OS mm \0.003 in)
CYLINDER HEAD REMOVAL
Remove the cylioder head cover (Page
6- 61_
Remove the cam chain ten. ioner bo lt, cy li n·
de r head bo lts and cyl inde r head.
NOTE
To prevent the cam chain from drop·
ping into the cran kcase. the cam chain
shOlJ ld be held
by
a piece of wire.
6-6
T ENSIONER SOlT
HEAD BOLT
68