Valve Guide Replacement - Honda ATC200S Workshop Manual

VALVE GUIDE REP LACEMENT
Support t he cylinder head and drive out the
gu ide from the valve port with a valve guide
remover.
NOTE
When driving out the guide. be careful
not to damage the head .
In~tall an O-ring on the new valve guide.
Drive in the guide from the top of the head .
NO TE
Inspect t he valve gu ide for damage.
Ream the new valve guide after installatio n.
NOTE
• Use cutting oil on the reamer dur ing
this operation •
• Rotate the reamer when insert ing
and rem oving it.
Clean t he cylinder head thorough ly to remove
any metal partide~.
Reface the valve seat.
. .
CYLINDER HEAD!VALVES
VALVE GUIDE DRIVER B
07742 - 0020200 or 07942-3290200
VALVE GUIDE REAMER
I
71
6-11