Fuel Strainer; Throttle Operation - Honda ATC200S Workshop Manual

FUEl STRAINER
Disconnect the fuel tube and drain fuel fr om the
fuel ta nk.
Kl'ep gosolint'
6"'<1),
fro m flamt'$
Qr
S (1<lrks. WiJn' up J;fJill .. d goso/in/' at once,
Remove the fuel valve by 100""nin9 t he valve
nut .
Remove The fuel strainer and wash it in clean
""nflamable or high flash point solvent.
Install the strainer and valve artd altach the
luelline.
Fill t he fue l lank and tum the fue l valve
"ON" and check for leaks .
THROITLE OPERATION
Check for smooth throttle lever full opening
and automatic full clos ing in all stlffi, ing
posit ions.
Mak e
s~re
there is no deTerioration, damage Or
kin king in the thrOl1le cable.
Replace any da maged parts.
Disconnect the th rOlt le cable al the upper
end .
Thoroughly lurn icate t he cable and pivo t
po int with a commercially availab le coble
lubricant 10 preven t premature wea r .
Insta ll the t hr ottle cable.
Make sur e the thrott le lever
free
play is
5- 10
mm (3/1 6-1 /S inl at the tip of th e throttle
lever .
Adj,m
as follow,:
·8 4 :
Remove the fuel tank.
Slide the rubber cap off the adju,ter On the
carburetor caP.
Adjust the t hrott le lever tree play by turn ing
the adjuster on t he carburetor.
In'tall t he IKl juster rubber cap .ecurely.
In.tall the fuel tan k.
After ·84 :
A cable adj uste r is located near the throttle
lever. Loosen the look nut a nd turn th e
adj uster to obtain t he correct free play.
T ig hte n the loc k nut
•
FUEL STRAINER
·S4 :
10mm
MA INT ENANCE
After ·8 4
5- 10 mm
(3/1 6 - 3/ S in)
THROTILE LEVER
•
(3/16 - 3/8 in)
L _________ .J
LEVE R
·S4·
RUBBE,R CAP
ADJUSTER
15
After · S4 ·
3-7