Lighting Equipment; Tires; Steering Head Bearings - Honda ATC200S Workshop Manual

MAINTENANCE
LIGHTING EQUIPMENT
Apply the park ing brake lever.
Start tne engine and check the headhsht arid
tail light by ope rat ing the lighting switch.
Posit ion Function
OFF
I
Head lights are OFF.
LO
Headlight low beam and tai l-
light should be ON.
HI
Headl ight high beam and tail.
ligh t should be ON.
tithe lights do not wor k prope rlv. chec k the
bulbs and reler to page \ 5-3 to test the
switch il necessary.
TIRES
Check the tire for cuts, imbedded nails. Or
other sharp objects. Check t he tire pressu re.
NOTE
Tire pressure shoul d be che(:ked when
the t ires are COLD.
TI RE PRESSURES:
R&cOmm8nded -prenu' 8:
2.2 psi (15 kPa. 0. 15 kg/cm
'
)
Minimum p.en".e:
1 .8 psi 11 2 kPa , O.12kg/ cm ' )
Maximum p. en".e:
2.6 psi 118
kPa,
0.18
kgfcm')
STANDARD TI RE CI RCUMFERENCE:
' 84 - ' 851.759 mm 169.3 in)
Aha . ' 86 1.760 mm (68.9 in)
STEERING HEAD BEARINGS
NOT E
Make sure The cables do nOI in lerfere
with the rotation of the handleba r.
Raise t he front wheel off the ground and
ma ke sure that the handlebilr rotates freely.
lithe handlebar moves unevenly, binds Or has
vert ica l movement , adjust the steering head
bearing by t urning t he steering head adjust ing
nut with a pin spanner (Pagell - 29).
3-18
LI<3HT"' "
'M'JITCH
BEAR INGS
36