Tire Repair - Honda ATC200S Workshop Manual

FRONT WHEEl/BRAKE /STEERING
TIRE REPAIR (WITH COLD
PATCH)
O1eck the tire tread for puncturirlg objecu.
Chalk mark the punctured area and remove
the punctu ring object.
Clean and roughen the punctured area with
t ire rubber deaner Or a wire brush . Clean the
area with non·flammable solvent.
NOTE'
Use a solvent that will not leave an oily
r~idue.
Do not use gasoline.
Apply rubber cement around the torn area
and al low it to dry . Remove the lining from
the patch and center it over the puncture.
Preu the pat ch agai nst the puncture using
a
special ro ller.
NOTE:
• Allow the cement to dry unti l tac ky
be{ore applying 11 patch.
• Do not tough the cement surface
with dirty or greasy hands.
11-14
ROLLER
I
ISO