Engine Oil Level Check; Engine Oil Change And Oil Filter Screen Cleaning; Engine Oil Capacity - Honda ATC200S Workshop Manual

LUBRICAT ION
ENGINE Oil lEVEL CHECK
Place (he A TC art leyel ground.
Oleck the oil level with the oil cap/dipstick .
Do
not SCrew irt the cap wher. ma kin g thi.
check.
If the o il level i. below the lower level mark
On Ihe dipstick, lill to troe upper leve l mark
wi t h Ih e recommended oil (Page 2- 1).
ENGINE Oil CHANGE AND
Oil FIlTER SCREEN CLEANING
NOT E
• Orain the o il with t he engine warm,
• Th e oil li lter scr een artd spring will
come out when the oil filter screen
cap is removed .
Remove the oil filter screen cap.
Operale the recoil starler several times
10
completely drain any re.idual oi l.
Clean Ihe oilli ller scree n.
Make sure thaI Ihe oil filter screen, sealing
rubber, screen cap and O-r ing are in good
condition.
In stall Ihe oi l filter screen, spr ing and screen
cap.
TORQUE: 9-1S N·m IO,9-1.S k i"m,
6.5-10.8 ft·lb l
Fill Ihe crankcase with the recommended
grade oil (Page 2- 11.
ENGINE OIL CAPAC ITY;
0.951ita,s (1.0
US qt , O.Slmp qt )
after draining
In.(all the oil filler cap.
Start the engine and le t it idle for 2-3
minules.
Stop the engine.
With Ihe ATC On level grO<Jnd, ma ke sure Ihat
the oil level i.atthe upper level mark.
Be sure Ihere are no oil leaks.
2-2
16
FILTER SCREEN
,..,...;;~
UPPER
LEVEL