Table of Contents
Advertisement
Alarms relating to sensors and drives
Alarm message in time
data display section
FAN Stopped
DR-FAN Stop
High TEMP!
Error Messages
Error codes appear in the time data display when an error
(usually a hardware problem) occurs. In addition, both
error messages and error codes appear in the monitor video
section and on the video monitor connected to the unit.
When an error message appears, follow the instructions in
the error message to resolve the problem.
Error code in time data display section
ERROR
AN ERROR HAS BEEN
DETECTED. INFORM SERVICE
OF FOLLOWING CODE:
50-010
PRESS EJECT KEY
TO EJECT DISC.
Error code in monitor video section
To Eject Discs with the Unit Powered
Off
As an emergency measure, disc cartridges can be removed
with the unit powered off. This operation should always be
done by a trained service technician.
Alarm message in monitor video
section
FAN MOTOR STOPPED.
DRIVE FAN MOTOR STOPPED.
HIGH TEMPERATURE.
HIGH TEMPERATURE IN DRIVE.
Error code
Description/action
Contact your Sony dealer.
Note
The unit will not stop operating, but if you continue to
use it in this state temperatures inside the unit or the
drive will rise, possibly resulting in failure or fire.
95
Troubleshooting
Advertisement
Table of Contents
