Locking (Write-Protecting) Clips - Sony PDW-75MD Instructions For Use Manual

Name of current clip list
Sub clip information (date and
time of creation, initial timecode,
playback time)
Currently selected sub clip
Recording date and time
of clip list
a) When a title has been assigned to a clip list, the title is enclosed in double
quotation marks, for example "SAKURA".
To return to the previous screen
Press the THUMBNAIL button, turning it off.
2
Select the thumbnail whose clip you want to cue up
(you can do this with the same operations as step 1 of
"To select a thumbnail image and start playback" (see
page 42)).
3
Press the SET button or the PLAY button.
If you press the SET button, a still image appears
showing the first frame of the selected sub clip.
If you press the PLAY button, playback starts from the
first frame of the selected sub clip.
Note
In clip lists, the first frame of the sub clip (the In point
frame) is always displayed as the thumbnail.

Locking (Write-Protecting) Clips

In the thumbnail screen, you can lock them so that they
cannot be deleted or altered.
Locking prevents the following operations on clips.
• Deletion
• Renaming by FAM or FTP
• Changing the thumbnail image (index picture)
• Adding and deleting shot marks
Notes
• Locked clips are deleted along with other clips.
46
Playback
Sixth frame is selected from
a)
a total of 34 sub clips
Total playback time of sub
clips in the clip list
• Clips cannot be locked or unlocked when the Write
Inhibit tab of the disc is set to the recording disabled
position, or when "REC INH" on page P1 of the
function1 menu is set to "ON".
1
With the SUB CLIP button off, press the
THUMBNAIL button, turning it on.
The thumbnails of the clips on the disc appear.
2
Select the clip to lock. (you can do this with the same
operations as step 1 of "To select a thumbnail image
and start playback" (see page 42).)
Clip to be locked
3
Press the MENU button.
The CLIP menu appears.
4
Use the V/MARK1 or v/MARK2 button to select
"LOCK/UNLOCK CLIP", and then press the SET
button.
A lock confirmation screen appears. This screen
displays clip names and clip titles.
To cancel the lock operation and return to the
THUMBNAIL screen
Select "CANCEL", and then press the SET button.
Press the RESET or MENU button.
5
With OK selected, press the SET button.
You return to the thumbnail screen, and a lock icon
appears on the thumbnail of the selected clip to show
that it is locked.