Table of Contents
Advertisement
METADATA [Metadata]: Metadata settings
INDEX POSITION [> Index Pos]: Specify which frame to use
as the thumbnail image (index picture) when recording.
STORE OWNER [> Ownership]: Create UMID owner
information.
MENU GRADE [Menu grade]: Selection of menu items to
be displayed
Determine whether to display basic items only or both basic
and enhanced items in the monitor video section and the time
data display section when using the setup menu.
Setup Menu Operations
This section explains how to change menu settings.
Buttons used to change settings
Use the following buttons to change menu settings.
Menu control buttons
MENU button
M/MARK1 and m/MARK2
buttons
</IN and ,/OUT buttons Press the ,/OUT button to go
RESET button
SET button
Changing the settings of basic items
The factory default setting is to display only the basic
items. To change the settings of basic items, proceed as
follows.
1
Press the M/MARK1 or m/MARK2 button to select
the required item.
Functions
• Display and hide the menu.
• Return to the menu from
setting screens.
These buttons move the
highlighted cursor up and down
within the current level to select
an item or setting. Hold down
one of these buttons to make
the highlighted cursor move
continuously.
down one level.
Press the </IN button to go
up one level.
Hold down one of these
buttons to make the highlighted
cursor move continuously.
• Returns the setting to the
factory default setting.
• Answer "No" to the question.
• Saves the new setting in
memory.
• Answer "Yes" to the question.
Description
0SEC [>> 0 sec] to 10SEC [>> 10 sec]: The frame at 0
seconds to 10 seconds from the top of the clip, specified in
units of 1 second.
Factory default setting: *0 SEC
The STORED OWNERSHIP screen appears.
For details, see Appendix "Setting UMID ownership
information" on page 101.
Description
*BASIC [>> Basic]: Display basic items only.
ENHANCED [>> Enhanced]: Display both basic and
enhanced items.
Example: Screen display when DISPLAY
CONTROL is selected
SETUP MENU
OPERATIONAL FUNCTION
DISPLAY CONTROL
MENU GRADE
2
Press the ,/OUT button.
This displays menu level 2 for the menu item selected
in step 1.
Example: Screen display of the second level of the
DISPLAY CONTROL menu
SETUP MENU
DISPLAY CONTROL
SUB STATUS
BRIGHTNESS
ALARM
HD CHARA
SD CHARA
3
Press the M/MARK1 or m/MARK2 button to select
the required item.
For menu items on level 3, press the ,/OUT button
to go to level 3, then press the M/MARK1 or m/
:BASIC
:OFF
:55
:ON
:ALL
:ALL
Current setting
System Menu
81
Advertisement
Table of Contents
