Table of Contents
Advertisement
Item name (name between
[ ] is name in the time data
display section)
H2: LASER PARAMETER
[Lasr] (optical heads
output counter)
H3: SEEK RUNNING[Seek]
H4: SPINDLE
RUNNING[Spdl]
H5: LOADING
COUNTER[Load]
To exit from the digital hours meter
Press the MENU button.
When the unit is powered on
Alarm message in time
data display section
MENU Ver. UP
ILL. SETUP!
88
Troubleshooting
Description
Displays a cumulative count
of the number of outputs
from the optical heads, with
adjustments for operating
mode and operating
temperature.
This shows the cumulative
seek operation time for
optical head in units of
hours.
This shows the cumulative
spindle rotation time in units
of hours.
Display the total number of
times discs have been
loaded in the unit.
Alarm message in monitor video section
THE SETUP MENU SOFTWARE HAS BEEN
UPGRADED.
SET THE SETUP MENU ITEMS TO THE
DESIRED SETTINGS.
INVALID SETTINGS SELECTED IN SETUP
MENU.
SET ITEMS IN THE SETUP MENU TO THE
APPROPRIATE VALUES. CONTACT SERVICE
IF THIS ALARM APPEARS AGAIN AFTER
ABOVE PROCEDURE.
Troubleshooting
Alarms
An alarm (warning message) appears in the time data
display section when an operation is attempted which is
inappropriate for the settings on this unit or the state of the
disc. Both the alarm message and the action to take to
resolve the problem appear in the monitor video section
and on the screen of the external video monitor connected
to the unit.
Example alarm in time data display section
ALARM
REMOTE MODE IS SELECTED.
SET REMOTE/LOCAL/NETWORK
SWITCH TO LOCAL.
Example alarm in monitor video section
When an alarm is displayed, remove the alarm cause by
following the action to take. If the alarm display does not
disappear, contact your Sony dealer.
Please note that there are some alarms which do not appear
depending on the setting of DISPLAY CONTROL
>ALARM in the setup menu (see page 78).
See "System Menu" (page 74) for more information about
setup menu operations.
You can check a history of the most recent alarms by
selecting the LAST ALARM item in the system menu.
Description/action
Reset the settings in the setup menu (see page
75).
Reset the settings in the setup menu (see page
75). If the same message appears after you
reset the settings, contact your Sony dealer.
Advertisement
Table of Contents
