Table of Contents
Advertisement
DISPLAY CONTROL [Display]: Settings related to display
on the LCD panel of this unit and on an external monitor
SUB STATUS [> Sub status]: Select the supplementary
status information shown in the monitor video section and
on an external monitor.
BRIGHTNESS [> Brightness]: Adjust the brightness of the
display.
ALARM [> ALARM]: Select whether to display alarm
messages.
HD CHARA [> HD char]: Specifies the HD output
connector(s) to which superimposed text information is
output when CHAR SEL in page P1 of the function menu
is set to "ON".
SD CHARA [> SD char]: Specifies the SD output
connector(s) to which superimposed text information is
output when CHAR SEL in page P1 of the function menu
is set to "ON".
78
System Menu
Description
*OFF [>> OFF]: No supplementary status information
TC MODE [>> TC mode]: Indications of the operating mode of
internal timecode generator
REMAIN [>> Remain]: Free capacity of the disc in minutes,
and the number of new clips that can be recorded on the
disc
CLIP NO [>> Clp No]: Clip number
PLAYBACK REMAIN [>> PB remain]: Time from the current
playback position to the recording end position, displayed
in time data format
For details of supplementary status information displayed on
the monitor when a setting other than OFF is selected, see
"Displaying Supplementary Status Information" (page 34) in
Chapter 2.
The LCD BRIGHTNESS screen appears.
Factory default setting: *55
See page 31 "Adjusting the Brightness of the LCD Panel" for
more information about how to adjust the brightness.
OFF [>> OFF]: In general, do not display alarm messages.
However, do display some important alarm messages.
ON(LIMITED) [>> ON(Limit)]: Display a minimum number of
alarm messages.
*ON [>> ON]: Display all alarm messages.
HDSDI2 [>> HDSDI2]: Superimposed text is output to the
HDSDI OUTPUT 2 connector only. It is off for the HDSDI
OUTPUT 1 and MONITOR connectors.
*ALL [>> ALL]: Superimposed text is output to both of the
HDSDI OUTPUT 1 and 2 connectors and to the MONITOR
connector.
OFF [>> OFF]: Superimposed text is off for both of the HDSDI
OUTPUT 1 and 2 connectors and for the MONITOR
connector.
SDI [>>SDI]: Superimposed text is output to the SDSDI
OUTPUT connector only. It is off for the COMPOSITE
OUTPUT connector.
COMPOSITE [>> COMP]: Superimposed text is output to the
COMPOSITE OUTPUT connector only. It is off for the
SDSDI OUTPUT connector.
*ALL [>> ALL]: Superimposed text is output to both the
SDSDI OUTPUT connector and the COMPOSITE
OUTPUT connector.
OFF [>> OFF]: Superimposed text is off for both the SDSDI
OUTPUT connector and the COMPOSITE OUTPUT
connector.
Advertisement
Table of Contents
