Table of Contents
Advertisement
MARK2 button to select the item whose setting you
wish to change.
Example: Screen display when SUB STATUS is
selected
DISPLAY CONTROL
SUB STATUS
BRIGHTNESS
ALARM
HD CHARA
SD CHARA
4
Press the ,/OUT button.
This displays all possible settings for the item selected
in step 3.
DISPLAY CONTROL
SUB STATUS
* OFF
TC MODE
REMAIN
CLIP NO
PLAYBACK REMAIN
5
Press the M/MARK1 or m/MARK2 button to change
the setting of the item.
DISPLAY CONTROL
SUB STATUS
* OFF
TC MODE
REMAIN
CLIP NO
PLAYBACK REMAIN
6
To change other settings, press the </IN button to
return to the previous screen, then repeat steps 3 to 5
as required.
7
When you have completed the settings, press the SET
button.
The message "NOW SAVING..." appears in the
monitor video section, and "Saving..." appears in the
time data display section, while the new settings are
saved in memory.
82
System Menu
SETUP MENU
:OFF
:55
:ON
:ALL
:ALL
SETUP MENU
:OFF
SETUP MENU
:OFF
When the saving operation is completed, the monitor
video section and time data display section return to
their normal indications.
Notes
• If you power off the unit before a save operation is
completed, settings may be lost. Wait until the save
is completed before powering off the unit.
• If, instead of pressing the SET button, you press the
MENU button, the new settings are not saved. The
message "ABORT !" appears in the monitor video
section and "Abort !" in the time data display section
for about 0.5 second, and the system exits the menus.
To change more than one setting, be sure to press the
SET button after making the settings.
Meanings of indications on the menu
screen
On-screen indication
Right-pointing arrow (c) at
the right of a menu item
See step 1 of the foregoing
operating procedure (see
page 81).
Left-pointing arrow (C) at
the left of a menu item
See step 2 of the foregoing
operating procedure (see
page 81).
Character string at the
right of a menu item
An * (asterisk) in a
complete list of settings
See step 4 of the foregoing
operating procedure (see
page 82).
Displaying enhanced items
The factory default setting is not to display enhanced
items.
To display enhanced items, set the menu item MENU
GRADE to "ENHANCED", following the procedure in
Meaning
Pressing the ,/OUT button
switches to the next lower
menu level or to a setting
selection screen.
Pressing the </IN button
returns to the previous (higher)
menu level.
Current setting of the menu
item
When shown with a colon (:):
the current setting is the
same as the factory default
setting.
See step 2 of the foregoing
operating procedure (see
page 81).
When shown with a raised
dot (•): the current setting
is different from the factory
default setting.
See the next item,
"Displaying enhanced
items".
Factory default setting
Advertisement
Table of Contents
