OPERATIONAL FUNCTION [Operational]: Operation
settings
REC FORMAT [> REC format]: Select the recording format.
DISC END [> Disc End]: Select what the unit should do when
the free disc capacity is exhausted during recording.
CLIP TITLE [> Clip Title]:
Specify how to assign clip
titles.
FILE NAMING [> File Name:
Specify the clip and clip
list name format
SYSTEM SEL [> System
Sel]: Select the system
frequency and area of
use.
Note
After changing any of the sub-
items, press the on/standby
switch to power the unit off
(put it into standby), and then
press it again to power the unit
on. The initial settings of the
setup menu as a whole will
change to reflect the settings
made here.
VAR SPD LIMIT [> VAR limit]: Specify whether to limit the
speed of variable speed playback
ASM POSTROLL [> Postroll]: Specify whether to record
postroll when executing assemble editing
CLIP CONT. REC [> C. CONT. REC]: Select whether to
enable the Clip Continuous Rec function.
FIND MODE [> Find mode]: Specifies what to find when the
NEXT or PREV button is pressed.
AUTO TITLE [>> AT Title]:
Select whether to assign
clip titles automatically.
TITLE [>> Title]: Assign
arbitrary titles.
NAMING FORM [>> Name
Form]: Specify the clip
and clip list name format.
AUTO NAMING [>> AT
Naming]: Specify the
format of the file names
generated when clips are
recorded.
SYSTEM FREQ [>> Sys
Freq]: Select the system
frequency.
UC/J SELECT [>> UC/J sel]:
Select the area of use.
Description
HQ [>> HQ]: 35 Mbps
*SP [>> SP]: 25 Mbps
LP [>> LP]: 18 Mbps
DVCAM [>> DVCAM]: 25 Mbps (only when PDBK-104 option
board is installed)
GOTO TOP [>> GOTO TOP]: Move to the top of the disc.
END STOP [>> END STOP]: Stop at the end of the disc.
*EJECT [>> EJECT]: Eject the disc automatically.
*DISABLE [>>> DISABLE]: Do not assign.
ENABLE [>>> ENABLE]: Assign.
The CLIP AUTO TITLING screen appears.
For details, see "To assign clip titles" (page 52) in Chapter 4.
*C**** [>>> C****]: Standard format
free [>>> free]: Enable free format.
*C**** [>>> C****]: Standard format
title [>>> title]: Assign the same name as clip title.
*60I [>>> 60i]: 59.94i
50I [>>> 50i]: 50i
30P [>>> 30P]: 29.97P
25P [>>> 25P]: 25P
UC [>>> UC]: For areas outside Japan
*J [>>> J]: For Japan
*OFF [>> OFF]: –1 to +2 times normal speed
ON [>> ON]: 0 to +1 times normal speed
OFF [>> OFF]: Do not record postroll.
*ON [>> ON]: Record postroll.
*OFF [>> OFF]: Disable Clip Continuous Rec.
ON [>> ON]: Enable Clip Continuous Rec.
*REC START EM [>> R.ST]: Jump to the next (when the
NEXT button is pressed) or previous (when the PREV
button is pressed) REC START essence mark.
CLIP [>> Clip]: Jump to the first frame of the next (when the
NEXT button is pressed) or previous (when the PREV
button is pressed) clip.
77
System Menu