Setup Menu Operations - Sony MSW-A2000 Operation Manual

12-2 Setup Menu Operations

To display setup menus
ASSEMBLE
VIDEO TC CH1 CH2 CH3 CH4
CHANNEL
VID. IN PB/EE CONFI CTL/TC
CONDITION
Y-R,B PB OFF TC
HOME F1 F2 F3
HOME button
Function menu HOME page
With the function menu HOME page showing in the
menu display, press the F5 (MENU) button.
The currently selected setup menu item is displayed in
the menu display, with the menu item number flashing.
For basic operations in the menu display, see page 2-8.
SET
H01 : OPE HOURS
UP
SELECT
Setup menu item H01 displayed
12-2
Chapter 12 Setup Menus
MULTI
RECORDER
CONTROL
CH5 CH6 CH7 CH8
PUSH/ PLAYER
SHIFT
ALARM
KEY INHI
MENU TCGSET
RESET
F4 F5 F6
F5 (MENU) button
O
SET EXIT
To display menus on the monitor
Setting CHARA to ON in function menu page 4 allows
you to display setup menus on the monitor connected
to the COMPOSITE VIDEO OUTPUT 3(SUPER)
connector or SDI OUTPUT 3(SUPER) connector of
this unit. When a setup menu appears on the monitor, a
cursor indicates the currently selected menu item.
Group name for the
currently selected item
Cursor indicating
the currently
selected item
Customizing the setup menu
You can customize the setup menu so that items which
you do not use are not displayed.
"[C]" appears in the upper right of the monitor when
the menu is customized (when there are items which
are not displayed). However, there is no indication in
the menu display section that the menu has been
customized.
For details about how to customize the setup menu, refer to
the Maintenance Manual.
Displaying a desired menu item
ASSEMBLE
VIDEO TC CH1 CH2 CH3 CH4
CHANNEL
–
SET 001:P–ROLL TIME
CONDITION
UP
SELECT
HOME F1 F2 F3
v and V buttons
When the menu item number displayed in the menu
display is flashing, you can change the menu item by
turning the MULTI CONTROL knob.
To skip from one item group to the next, press the v
button or V button.
MULTI
RECORDER
CONTROL
CH5 CH6 CH7 CH8
PLAYER
PUSH/
SHIFT
ALARM
KEY INHI
5S
SET EXIT
RESET
F4 F5 F6
MULTI
CONTROL knob