Getting Started; Clock Setting; Stop/Clear; To Cancel A Programme - Sharp R-390D Manual

Table of Contents

Advertisement

Getting Started

Before operating the oven, make sure you read and understand this operation manual.
1. Plug the oven into a power point and switch on the power. Select SET CLOCK or VIDEO DEMO.
2. Touch SET CLOCK and follow the instructions below.
NOTES: 1. If no selection is made for 30 seconds, the Video Demo will be-
gin automatically. To cancel the Demo Mode, press the STOP/
CLEAR pad and the screen will return to the Home Page.
To set the clock, press the SET UP pad, touch CLOCK and fol-
low the directions on the Touch screen.
2. If you do not want to set the clock, press the STOP/CLEAR pad
once. The screen will go to the Home Page without the time of day.

Clock Setting

* To enter the present time of day 12:45 PM.
1. After touching SET CLOCK,
enter the time of day (hour)
by touching HOUR 11 times.
The clock will start and the
display will return to the
Home Page.

Stop/Clear

Press the STOP/CLEAR pad to:
1. Return to the Home Page screen, if you make a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel Kitchen Timer.
To Cancel a Programme During Cooking
Press the STOP/CLEAR twice.
2. Enter the time of day (min-
utes) by touching 10 MIN 4
times and 1 MIN 5 times.
NOTES:
1. Press the STOP/CLEAR pad if you make a mistake during
programming.
The Home Page will appear. To set the clock again, press the
SET UP pad on the control panel and touch CLOCK. Then follow
the instructions on the Touch Screen.
2. If you want to reset the time of day, press the SET UP pad and
follow the directions.
3. If the electrical power supply to your microwave oven is inter-
rupted, the screen will show SET CLOCK or VIDEO DEMO after
the power is reinstated. If this occurs during cooking, the pro-
gramme will be erased.
Simply touch SET CLOCK and follow the instructions.
4. If you continuously touch HOUR, 10 MIN or 1 MIN on the Touch
Screen, the time will count up automatically.
6
3. Select AM or PM, then press
the INSTANT COOK/START
pad to set the clock.

Advertisement

Table of Contents
loading

Table of Contents