Before Operating; Getting Started; Clock Setting; Stop/Clear - Sharp R-398E Operation Manual

BEFORE OPERATING

Getting Started

Step Procedure
Plug the oven into a power point and
switch on the power.
1
Ensure the oven door is closed.
Press the STOP/CLEAR pad.
2

Clock Setting

* To enter the present time of day 11:34 (AM or PM).
Step Procedure
Press the CLOCK/SET TIMER pad
once.
1
Press the START/+30SEC.
pad.
2
Enter the correct time of day by
pressing the numbers in sequence.
3
Press the START/+30SEC.
pad.
4
This is a 12 hour clock. If you attempt to enter an incorrect clock time (eg. 13:45),
START TO SET will appear in the display. Press the STOP/CLEAR pad and re-enter the time of day (eg. 1:45).

Stop/Clear

Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
Pad Order
Pad Order
CLOCK/
SET TIMER
x 1
The dots (:) will flash on and off.
7
Display
Display
ENTER TIME PRESS