Water Heater Installation - State Water Heaters SUF 130 300 Instruction Manual

CONDENSATE DRAIN INSTALLATION
INSTALLATION NOTES
1.
heater for this reason.
2.
EXHAUST (VENT)
ELBOW
PVC TEE FITTING
1 ½" SLIP x 1 ½" SLIP x ½" NPT
PVC BUSHING
1 ½" SLIP x 1 ¼" NPT
PVC PIPE PLUG
1 ¼" NPT
CLEANOUT PIPE
PLUG SHOULD
BE ORIENTED TO
THE FRONT OF THE
WATER HEATER FOR
SERVICE ACCESS

WATER HEATER INSTALLATION

CLEANOUT PLUG SHOULD
FACE TOWARDS THE FRONT
OF THE WATER HEATER FOR
SERVICE ACCESS
FACTORY INSTALLED
CONDENSATE TRAP
Figure 50
PVC PIPE NIPPLE
½" NPT
CONDENSATE TRAP DETAIL
Figure 51
3. DO NOT
INSTALLATION INSTRUCTIONS
1.
2.
3.
NOTE:
4.
5.
every three feet.
6.
Start Up on page 50.
PVC BUSHING
1 ½" SLIP x ½" SLIP
36
CONDENSATE DRAIN
LINE - FIELD INSTALLED
DRAIN LINE TO
TERMINATE NO
MORE THAN 6
INCHES (15.2 cm)
ABOVE DRAIN
BUILDING
DRAIN
½" PVC 90° ELBOW
CONDENSATE DRAIN
CONNECTION. FIELD
INSTALLED DRAIN
LINE CONNECTS HERE
½" PVC PIPE NIPPLE
½" PVC 90°
STREET ELBOW