Table of Contents
Advertisement
Safety
Transport Use a lifting carriage or stacker to transport the machine. Raise the
Setup The connecting cable must have a power plug approved in
Obligations
of the operator
Operating Instructions D887 e-con - 00.0 - 11/2023
2
Safety
This chapter contains basic information for your safety. Read the
instructions carefully before setting up or operating the machine.
Be sure to follow the information in the safety instructions.
Failure to do so can result in serious injury and property damage.
2.1
Basic safety instructions
The machine may only be used as described in these instructions.
The instructions should be available at the machine's location at
all times.
Work on live components and equipment is prohibited. Exceptions
are defined in the DIN VDE 0105.
For the following work, the machine must be disconnected from
the power supply using the main switch or by disconnecting
the power plug:
• Replacing the needle or other sewing tools
• Leaving the workstation
• Performing maintenance work and repairs
• Threading the needle thread
Missing or faulty parts could impair safety and damage the ma-
chine. Only use original parts from the manufacturer.
machine max. 20 mm and secure it to prevent it from slipping off.
the relevant country. The power plug may only be assembled
to the power cable by qualified specialists.
Follow the country-specific safety and accident prevention regu-
lations and the legal regulations concerning industrial safety and
the protection of the environment.
9
Advertisement
Table of Contents
