Display Time; Applied Pressure; Ihb - A&D TM-2657P Instruction Manual

10.2. Display time

The display time for measurement results can be set using the function
Use the ▲ button to change the setting. The setting item appears in the diastolic display section.
DIA LED
No display of results (All values are displayed as "---")
5 seconds
10 seconds
20 seconds
Remains displayed

10.3. Applied pressure

The applied pressure can be set using the function
Use the ▲ button to change the setting. The setting item appears in the diastolic display section.
(If automatic applied pressure (
the applied pressure value is automatically determined.)
DIA LED
Automatic applied pressure
160 mmHg
180 mmHg
200 mmHg

10.4. IHB

The IHB setting can be set using the function
Use the ▲ button to change the setting. The setting item appears in the diastolic display section.
DIA LED
IHB off
IHB on
When IHB is on:
Printing example
When IHB is detected
For details on IHB, see "3. ABBREVIATIONS AND SYMBOLS".
Display time setting
F03
Aut
) is set, pulsation is observed while pressure is applied and
Applied pressure setting
F05
.
IHB setting
When IHB is not detected
22
F02
.
Default
.
Default
Default